Tether your camera and laptop to one stand
The Kupo KS-600B Tether Arm is a handy and elegant solution to tethered shooting. The 60cm long arm center comes with a 3/8’’ receiver, offering an easy to mount crossbar on a tripod base or light stand, ready to support your camera and laptop.
Each of the two sliding platforms are equipped with a 3/8’’ screw allows double ball-heads to mount for tethered shooting either with two parallel cameras, or a camera and a Kupo Tethermate laptop platform, or even two Tethermates to support a laptop and a Wacom. Each of the two platforms has a control to release and constrain the movenent of the platforms along the 60cm arm.
Further, each end of the Tether Arm has a 3/8" screw mount so that a tripod Ballhead or other equipment can also be attached to the Tether Arm. This can be a useful feature for Macro photography and copy stand work.
60cm cross arm with four 3/8"-16 mounts to adapt multiple devices to a single tripod or stand
Three sliding clamps along length of cross arm, one centre clamp and two side clamps
The centre clamp's accessory thread allows for direct attachment to a tripod, light stand, C-Stand, or support device that features a 3/8"-16 mount
Side clamps each have mounts that can mount a tripod ballhead or any other device with a 3/8"-16 female thread
Both ends of cross arm include a side-facing 3/8"-16 mount
Each sliding clamp includes a control handle and an integrated thumbwheel
Control handles can be loosened or tightened to release or lock sliding movements
One side clamp and a centre clamp can be fully pushed to one side to allow the remaining clamp up to 38cm of movement
Both side clamps have a maximum range of up to 28cm if the centre clamp is locked in the middle of the cTether Arm
Turning a side clamp's thumbwheel allows its 3/8"-16 mount to rotate and thread directly into a tripod ballhead for easier mounting
Side clamp thumbwheels help to ensure that any items installed on the side clamp mounts are fully secured and pointed in the desired direction
The centre clamp's thumbwheel means you do not need to rotate the entire Tether Arm to attach it to the tripod base or light stand
A camera connected to a tripod ballhead at either of the side-facing 3/8"-16 end mounts can be cantilevered past the tripod or stand's legs, useful for copy stand or macro photography of subjects below the camera lens
Durable, aluminium-alloy construction
Female Connection Type One 3/8"-16 accessory thread
Male Connection Type Four 3/8"-16 mounts
Full Aluminium alloy construction
Dimensions 59.2cm x 6.1 cm
Weight 1.5 kg