Ledgo 1x2 Honeycomb Grid for MagicHue G260 and StudioStream S280
AU$119.00
AU$239.00
50% OFF
Grid and Creative Mask Kit for 30cm Round VictorSoft 12 LED Soft Panel
AU$39.00
AU$99.00
61% OFF
Lighting grids reduce spill and give photographers and filmmakers more directional control without replacing the main modifier. Explore fabric eggcrates for softboxes and LED panels, honeycomb grids for reflectors, and fixture-specific grids for professional Nanlite, Nanlux, Jinbei and Ledgo lighting.
A grid limits the angles at which light can leave a modifier. From the front, the source remains broad and relatively soft; from the side, less light escapes. This helps keep illumination off backgrounds, walls, ceilings and the camera lens while increasing separation and contrast.
Fabric grids attach to the front edge of a compatible softbox. They are commonly used for portraits, interviews, product photography and rim lighting where a soft source is required without broad spill. Match the grid to the exact softbox shape and dimensions for correct tension and coverage.
Panel eggcrates narrow the wide output of a flat LED fixture. They are useful in small studios and location interiors where uncontrolled side spill can contaminate a background or nearby subject. Fixture-specific attachment points mean compatibility should be checked by exact model.
Metal honeycomb grids fit compatible reflectors and produce a more concentrated pool of light. The specified angle indicates the approximate spread: a smaller angle gives a tighter beam, while a larger angle covers more area. Grid sets may provide several angles for flexible control.
Some systems combine an eggcrate with masks, gels or other creative-control pieces. These kits can change the beam shape or colour as well as reduce spill. Check the included components and the fixture or reflector they are designed to fit.
Start with compatibility, then compare the grid angle, depth, material and attachment method. A deep or narrow-angle grid gives stronger control but reduces off-axis coverage. Fabric grids are lightweight and packable; metal honeycombs provide a rigid, defined pattern for compatible reflectors.
Attach the grid evenly so it cannot fall into the beam or obstruct fixture cooling. Use the supplied hook-and-loop, clips or retaining ring and add safety restraint when required overhead. Follow the fixture and modifier heat ratings, particularly with high-output lights.
Browse grids for softboxes, reflectors, LED panels and specialist fixtures. Compare size, angle and model compatibility, or pair a grid with products from Softboxes and Reflectors.
A grid mainly controls direction and spill. A gridded softbox keeps much of its frontal softness, although the light becomes more contrasty when viewed or positioned off-axis.
It describes the approximate controlled spread. Lower-degree grids are tighter; higher-degree grids allow broader coverage.
No. They must match the softbox’s dimensions, shape and attachment system. Even similarly sized modifiers may use different edge construction.
Some output is lost, especially off-axis. The practical change varies with the grid depth and angle, so meter the final setup when exposure consistency matters.
Simple instalment plans available instantly at checkout
Use your existing debit or credit card
No long forms, instant approval online
Pay fortnightly, enjoy your purchase straight away!
All your need is:
1) An Australian Visa or Mastercard debit/credit card; 2) To be over 18 years of age; 3) To live in Australia
To see Afterpay's complete terms, visit https://www.afterpay.com.au/terms
© 2026 Afterpay
