Yongnuo have released the long awaited updated RF-603 II manual flash triggers.
The RF-603 II are the follow up to the original and very popular inexpensive RF-603 flash triggers. And the MK II improves on some of the basic shortcomings of the original RF603 and RF-602 triggers.
C1 Compatible with:‰Û¬‰Û¬ Canon 1100D / 1000D / 700D / 650D / 600D / 550D / 500D / 450D / 400D / 350D / 300D / 60D‰Û¬‰ÛÓ Pentax K20D / K200D / K10D / K100D,‰Û¬‰ÛÓ Samsung GX-20 / GX-10‰Û¬‰Û¬‰Û¬
Sync Speed -
Low sync speed was always one of the main shortcomings of the RF-602, and even worse with the RF-603. Now that this is improved with the RF-603 II, it simply means you should be able to get a clean frame without any shutter (or black band) showing in the frame at your cameras maximum sync speed (1/250th etc). Though the Canon 5D series sometimes have to drop to 1/160th even with an instant sync cord.
Yongnuo are stating this as 1/320th maximum.
Locking Rings -
The original RF-603 has no locking rings on the foot. The RF-603 II now has locking ring and locking pin.
The RF-603 II is still manual pass through hot shoe only though (the extra contacts seen on the hot shoe are only for the flash wake up feature). Batteries are standard AAA.
Power and TX / TRX Switch -
The power switch has been moved to the side of the case, so that you don‰Ûªt have to remove the flash from the trigger to switch it on and off like the RF-602 and 603 require.
There is also the new TX ‰ÛÒ TRX option switch. The RF-603 are transceivers, meaning they are the same unit for transmitter and receiver, and can switch automatically between transmitting and receiving mode. This ability caused a number of extra issues in the original RF-603 though, like not being able to fire on non Canon/Nikon cameras, or fire the test fire button off the camera hot shoe. To help resolve these issues Yongnuo have added a switch to the new RF-603 II allowing you to set them as either TX or TRX. TX being set to transmitter mode only, and TRX as self-switching. TX mode is used when the transmitter is held in hand for taking light meter readings with the test fire button, or when used as transmitter only on the camera. If using combined flash and shutter release TRX mode would be used. Receivers would always need to be set to TRX.
Shutter Release -
One of the big advantages of the RF-603 (due to transceiver design) has always been the combined camera shutter release ability. You can fire the camera with an RF-603 used as a wireless remote shutter release, as well as fire remote flashes at the same time, with just the one radio trigger attached to the camera. Where as most non-transceivers require 2 separate triggers attached to the camera to do this. So the RF-603 offer a neater solution connected to the camera, and one trigger unit less cost.
This is where the TRX mode would also be used with the RF-603 II attached to the camera (via both the hot shoe, and a cord to the cameras shutter release). This also means you have backup transmitter, receiver, and shutter release units, as they are all the same unit and interchangeable.
Compatible with Non Canon / Nikon and Single Firing Pin Cameras -
With the rise of alternate brand mirrorless cameras it's becoming increasingly important for radio triggers to be as universal, and compatible, as possible with non-Canon/Nikon and single firing pin cameras.
The original RF-603 would not fire at all unless attached to a Canon or Nikon camera with full TTL contacts on the hot shoe. The RF-603 II will now work on most cameras provided they have a standard (non Sony) style hot shoe.
The flash wake up feature will not work on non-Canon/Nikon cameras though.
Help other PROtog users shop smarter by writing reviews for products you have purchased.